1. Dashboard
  2. Mitglieder
    1. Letzte Aktivitäten
    2. Benutzer online
    3. Team
    4. Mitgliedersuche
  3. Filebase
  4. Forum
  5. Zebradem-WIKI
  6. Foren-Regeln
  7. Spenden Liste
    1. Spenden
  • Anmelden
  • Registrieren
  • Suche
ZebraDem-Sponsoring
Dieses Thema
  1. Forum
  2. Receiver
  3. D-Box II
  4. Flashen und Debuggen

Dbox2 Nokia fährt nicht hoch

  • becks
  • 17. Juli 2007 um 00:04
  • becks
    Schüler
    Punkte
    320
    Beiträge
    50
    • 17. Juli 2007 um 00:04
    • #1

    Hallo,
    vielleicht kann mir einer helfen,habe eine Dbox2 Nokia Kabel 2xIntel und versuche ein neues Image drauf zuspielen.Habe es mit hallenberg und Hyperterminal probiert.Image rauf spielen kein problem nur dann beim hochfahren kommt die Box immer nur bis zum image logo.Ich habe verschiedene Images ausprobiert.
    Wer hat ein bitte Rat?
    MFG

    • Zitieren
  • Homer S.
    Meister
    Punkte
    12.525
    Beiträge
    2.394
    • 17. Juli 2007 um 13:01
    • #2

    Hallo becks,

    ein ähnliches Problem hatten wir erst kürzlich, schau mal hier:

    https://www.zebradem.com/showthread.php?t=14167

    Der kann auch flashen, nur steht die Box beim Boot-Logo. Evtl. hilft Dir dieser Thread schon mal weiter...

    Poste auf alle Fälle mal Dein Bootlog, dann sieht man evtl. was...


    Gruß

    Homer

    • Zitieren
  • becks
    Schüler
    Punkte
    320
    Beiträge
    50
    • 19. Juli 2007 um 19:20
    • #3

    Hallo,weiß nicht mehr weiter!!
    Hier mein Bootlog

    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-0b.ed.1f.07.00.00-2b
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 155204
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.1.4 (Tuxbox) (Aug 31 2006 - 20:09:02)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: .... done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 696900 bytes loaded to 0x100000
    ...............................................................
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 696836 Bytes = 680.5 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09:
    34 CEST 2006
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:ed:97
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00540000 : "root (squashfs)"
    0x00540000-0x007e0000 : "var (jffs2)"
    0x007e0000-0x00800000 : "FLFS (U-Boot)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    Oops: kernel access of bad area, sig: 11
    NIP: C0027388 XER: 8000107F LR: C0027360 SP: C1FED7E0 REGS: c1fed730 TRAP: 0300
    Not tainted
    MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
    DAR: 74B2F1D4, DSISR: C0000000
    TASK = c1fec000[1] 'swapper' Last syscall: 11
    last math 00000000 last altivec 00000000
    GPR00: C0197DD4 C1FED7E0 C1FEC000 00000001 00009032 00000505 C1EB4FD4 C1EB4020
    GPR08: BA2E8BA3 00000D03 ACB1EC67 74B2F1BC 35389833 00031B58 00000000 00000000
    GPR16: 00000000 0000000F 00000000 C1ED0000 00000000 C1ED0000 C018325C 0000001F
    GPR24: 00000C00 C01ED740 00000000 00000000 00000400 000000F0 C0197DCC C0197DC4
    Call backtrace:
    C0027498 C003407C C00341D4 C00368D4 C007CA38 C0080B8C C0021E2C
    C002242C C003B1BC C0051F10 C003BC58 C003BE64 C0005A00 C000285C
    C00022D8 C000511C
    Kernel panic: Attempted to kill init!
    <0>Rebooting in 180 seconds..

    • Zitieren
  • mitrovica
    Gast
    • 19. Juli 2007 um 19:44
    • #4

    Hi

    Also ohne jetzt deinen beitrag komplet gelesen zu haben.
    Netzwerk ist dein problem,und zwar definitiv!
    Deshalb auch das "bootnet failed"
    Firewalls an PC sowie Router ausschalten und sonstige Virenscener falls die am laufen sein sollten.Und probiere mit Hallenberg Flashassi erneut.
    Wenn das nicht bringt,gib bei Google -bootnet failed- da gibt es Anleitungen genug dafür.
    Beste Anleitung wie ich finde ist das von Dietmar-h,aber bei Wiki tuxbox werdest du auch fündig.

    gruss

    mitrovica

    • Zitieren
  • fishbone_badass
    Gast
    • 19. Juli 2007 um 19:51
    • #5

    Hallo


    ich denke, ich kann aus den Logs lesen, dass du keine Netzwerkverbindung zur BOX hast. Deine Box bootet das Image, das drauf ist, und das ist wahrscheinlich defekt, oder die box selber. Hast du ein Crosspatchkabel verwendet ? Mediasensing und 10MBit Halbduplex ?

    Hier mal was zum lesen.

    http://www.dietmar-h.net/flashprob.html


    so müsste es aussehen. :rolleyes:

    Code
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.2.100, My IP 192.168.2.202
    debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
    will verify ELF image, start= 0x800000, size= 140008
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000
    Alles anzeigen

    bei dir sieht es so aus

    Code
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed
    
    
    Flash-FS bootstrap loader (v1.5)
    
    
    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032
    
    
    will verify ELF image, start= 0x800000, size= 155204
    verify sig: 262
    Branching to 0x40000
    Alles anzeigen


    gruss

    fishbone


    Edit: also ich hab Ihn ganz gelesen .... na ja der Wille zählt.

    • Zitieren
  • mitrovica
    Gast
    • 19. Juli 2007 um 19:56
    • #6

    Also habe ich gerade auch ganzes gelesen,und festgestellt dass das Box mit Kernel probleme hat.
    "Attempted to kill init" am ende,erscheint immer wenn es mit Kernel etwas nicht stimmt.
    Das ist ein Hardwareproblem und ein Fall für einen Reparaturservice meine meinung nach.
    Tut mir leid !

    gruss

    mitrovica

    • Zitieren
  • becks
    Schüler
    Punkte
    320
    Beiträge
    50
    • 19. Juli 2007 um 20:25
    • #7

    Ich glaube auch das es ein Hardwareproblem ist.Weil ich habe verschiedene Images ausprobiert die lassen sich auch ohne Probleme drauf spielen.Aber immer das gleiche Problem.Ich benutze ein switch+ Nullmodemkabel.
    Wie teuer kann die Reparatur werden?

    • Zitieren
  • mitrovica
    Gast
    • 19. Juli 2007 um 20:38
    • #8

    Hallo becks

    Bootloader reparatur kostet zw.30 und 40 Euro denke ich.
    Schau mal hier z.b. http://www.dbox2.org/html/dbox2-umbau.html
    Wenn unerwünscht ,bitte entfernen.Danke.


    gruss

    mitrovica

    • Zitieren
  • Gast
    Gast
    • 19. Juli 2007 um 21:41
    • #9
    Zitat

    Wenn unerwünscht ,bitte entfernen.Danke.

    [color="White"]solche/ähnliche Links sind natürlich erlaubt, es geht prinzipiell um Links zu fremden ULCs![/color]

    • Zitieren
  • becks
    Schüler
    Punkte
    320
    Beiträge
    50
    • 6. August 2007 um 23:37
    • #10

    Habe die Box eingeschickt auf verdacht eines Hardwarefehlers.War ein Irrtum.Software neuinstalliert jetzt keine probleme mehr.

    • Zitieren
  • Hugo1806
    Gast
    • 8. August 2007 um 11:48
    • #11

    ja und was war es nun??? Hba ja das selbe!!

    • Zitieren

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!

Benutzerkonto erstellen Anmelden

Spenden

Vielen Dank für die Unterstützung!
Hiermit unterstützt du Zebradem.
Das beinhaltet überwiegend die Serverkosten und Lizenzgebühren.
Spenden

Letzte Beiträge

  • Copytrack auf Abmahnjagd: Ist es ein Schutz oder Abzocke?

    heugabel 25. Mai 2025 um 17:27
  • Piracy Shield – Kontroversen um EU-Rechtskonformität im Fokus

    heugabel 25. Mai 2025 um 10:27
  • Rapidgator: Auszahlungen der Uploader in der Kritik

    heugabel 24. Mai 2025 um 18:27
  • ClickFix-Malware: Eine Bedrohung über TikTok

    heugabel 24. Mai 2025 um 17:27
  • 6 GHz WLAN in der EU: Ein Machtkampf um dein Heimnetz

    Katze Flohli 24. Mai 2025 um 15:17
  • Meta AI Daten-Widerspruch – Jetzt Handeln!

    heugabel 24. Mai 2025 um 11:36
  • IPTV-Abzocke 2025: Bußgeldfallen und Abmahntricks

    heugabel 24. Mai 2025 um 11:27
  • Samsung TV Plus/Rakuten TV

    Fellfresse 22. Mai 2025 um 18:43
  • Pluto TV

    Fellfresse 22. Mai 2025 um 18:42
  • Update Mai 2025: Navigationssoftware und Portable Apps

    heugabel 22. Mai 2025 um 16:27

Aktivste Themen

  • Umbau D-Box II von Philips

    64 Antworten
  • Ich brauche hilfe

    55 Antworten
  • D Box bootet nicht

    53 Antworten
  • Nokia DBox2 nach flashen kein start mehr

    46 Antworten
  • Nokia 2xI Bmon 1.0

    43 Antworten
  • Flash auslöten , Bootloader neu flashen?

    41 Antworten
  • Komme nicht in Debug-Modus

    39 Antworten
  • Neues Image aufspielen

    36 Antworten
  • Box resettet immer

    35 Antworten
  • falsch geflasht - Box startet nicht

    32 Antworten
  1. Kontakt
© 2024 Zebradem - Software by WoltLab
  • Alles
  • Dieses Thema
  • Dieses Forum
  • Seiten
  • Dateien
  • Forum
  • Erweiterte Suche
Zitat speichern