die box ist sauber.
habe das jetzt zum dritten mal probiert immer der selbe efekt.
wo liegt der bootloader?
hast du bitte einen link für mich bezüglich kühlen des bootloaders.
Danke schonmal für die hilfe von allen
Nokia Dbox2 Sat
-
übernacht stehenlassen hat auch nicht geholfen geht wieder nicht ??
mal ein auszug aus dem bootlog hat endlich gefunzt
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting pid 105, console /dev/console: '/etc/init.d/start'Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
mv: unable to rename `/lib/tuxbox/plugins/mdextra.cfg': No such file or director
y
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 4500 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini Exp $
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
rm: cannot remove `/var/etc/.sectionsd': No such file or directory
01.01.1970 00:00:25 camd3: BOXTYPE: dbox2
01.01.1970 00:00:25 camd3: LOG: 6
01.01.1970 00:00:25 camd3: UDP_PORT: 20248
01.01.1970 00:00:25 camd3: original slot au on
01.01.1970 00:00:25 camd3: HTTP_PORT: 9080
01.01.1970 00:00:25 camd3: LOG_HOST: 127.0.0.1:514
01.01.1970 00:00:25 camd3: DNS_CACHE: 60 sec
01.01.1970 00:00:26 camd3: camd3.map not found
01.01.1970 00:00:26 camd3: camd3.ignore not found
01.01.1970 00:00:26 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere
...
01.01.1970 00:00:26 camd3: Slot /dev/tts/1: Warnung: IO-Fehler!
01.01.1970 00:00:27 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any
SERVICES=all
01.01.1970 00:00:27 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=a
ny SERVICES=1702:000000:0008,1722:000000:0008,
01.01.1970 00:00:27 camd3: UserDB(update): USER=benutzer110 PASS=password10 FRO
M=any SERVICES=1702:000000:0008,1722:000000:0008,
01.01.1970 00:00:27 camd3: error parse line #1 in camd3.keys
01.01.1970 00:00:27 camd3: error parse line #2 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #3 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #13 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #19 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #25 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #31 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #32 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #40 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #41 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #42 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #43 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #44 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #45 in camd3.keys
01.01.1970 00:00:28 camd3: error parse line #46 in camd3.keys
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
01.01.1970 00:00:29 camd3: error parse line #47 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #48 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #49 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #50 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #51 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #52 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #53 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #54 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #59 in camd3.keys
01.01.1970 00:00:29 camd3: error parse line #60 in camd3.keys
01.01.1970 00:00:32 camd3: error parse line #191 in camd3.keys
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
01.01.1970 00:00:33 camd3: error parse line #197 in camd3.keys
[neutrino] enable flash
[neutrino] Software update enabled
01.01.1970 00:00:33 camd3: error parse line #201 in camd3.keys
01.01.1970 00:00:33 camd3: error parse line #204 in camd3.keys
01.01.1970 00:00:33 camd3: error parse line #205 in camd3.keys
01.01.1970 00:00:33 camd3: error parse line #208 in camd3.keys
[sectionsd] getUTC: read: Connection timed out
01.01.1970 00:00:34 camd3: error parse line #218 in camd3.keys
01.01.1970 00:00:34 camd3: error parse line #229 in camd3.keys
01.01.1970 00:00:35 camd3: error parse line #238 in camd3.keys
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
01.01.1970 00:00:36 camd3: error parse line #255 in camd3.keys
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
01.01.1970 00:00:37 camd3: error parse line #272 in camd3.keys
01.01.1970 00:00:37 camd3: error parse line #275 in camd3.keys
01.01.1970 00:00:37 camd3: error parse line #278 in camd3.keys
01.01.1970 00:00:37 camd3: error parse line #281 in camd3.keys
01.01.1970 00:00:37 camd3: error parse line #284 in camd3.keys
/dev/input/event1: No such file or directory
01.01.1970 00:00:38 camd3: error parse line #287 in camd3.keys
01.01.1970 00:00:38 camd3: error parse line #290 in camd3.keys
[neutrino] menue setup
01.01.1970 00:00:38 camd3: error parse line #293 in camd3.keys
loading locales: scandir: No such file or directory
01.01.1970 00:00:38 camd3: error parse line #296 in camd3.keys
01.01.1970 00:00:39 camd3: error parse line #299 in camd3.keys
01.01.1970 00:00:39 camd3: error parse line #302 in camd3.keys
01.01.1970 00:00:39 camd3: error parse line #305 in camd3.keys
01.01.1970 00:00:39 camd3: error parse line #308 in camd3.keys
01.01.1970 00:00:39 camd3: error parse line #311 in camd3.keys
01.01.1970 00:00:40 camd3: error parse line #314 in camd3.keys
01.01.1970 00:00:40 camd3: error parse line #317 in camd3.keys
01.01.1970 00:00:40 camd3: error parse line #320 in camd3.keys
01.01.1970 00:00:40 camd3: error parse line #323 in camd3.keys
01.01.1970 00:00:40 camd3: error parse line #326 in camd3.keys
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:41 camd3: error parse line #331 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:42 camd3: error parse line #336 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:42 camd3: error parse line #341 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:43 camd3: error parse line #347 in camd3.keys
01.01.1970 00:00:43 camd3: error parse line #352 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:44 camd3: error parse line #360 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:45 camd3: error parse line #365 in camd3.keys
01.01.1970 00:00:45 camd3: error parse line #369 in camd3.keys
01.01.1970 00:00:45 camd3: error parse line #373 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
01.01.1970 00:00:46 camd3: error parse line #378 in camd3.keys
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
01.01.1970 00:00:49 camd3: error parse line #406 in camd3.keys
01.01.1970 00:00:49 camd3: error parse line #421 in camd3.keys
01.01.1970 00:00:49 camd3: error parse line #426 in camd3.keys
01.01.1970 00:00:49 camd3: error parse line #429 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #434 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #437 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #442 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #445 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #448 in camd3.keys
01.01.1970 00:00:50 camd3: error parse line #452 in camd3.keys
01.01.1970 00:00:51 camd3: error parse line #458 in camd3.keys
01.01.1970 00:00:51 camd3: error parse line #462 in camd3.keys
[dmx.cpp
184] read(fd, buf, n): Connection timed out
zap failed!
01.01.1970 00:00:51 camd3: error parse line #467 in camd3.keys
01.01.1970 00:00:51 camd3: error parse line #470 in camd3.keys
01.01.1970 00:00:51 camd3: error parse line #472 in camd3.keys
01.01.1970 00:00:51 camd3: error parse line #473 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #474 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #475 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #476 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #477 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #478 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #479 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #480 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #481 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #482 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #483 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #484 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #485 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #486 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #487 in camd3.keys
01.01.1970 00:00:52 camd3: error parse line #488 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #489 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #490 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #491 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #492 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #493 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #494 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #495 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #496 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #497 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #498 in camd3.keys
01.01.1970 00:00:53 camd3: error parse line #499 in camd3.keys -
Das sind doch alles gemeldete Software-Probleme würde ich meinen. Die beziehen sich doch alle auf deine verhunzte Camd3.keys!
Vor allem schreibst Du in deinem ersten Post, läuft seit 6 Monaten mit dem MD 4.1, aber da geab es das noch nicht. Von wem oder woher hast Du das Iamge denn?Besorge Dir mal ein ganz sauberes, und flashe das ohne das Du von vorn herein einen Emu installierst. Und teste es mit Deiner Karte und ich bin mir sicher es läuft!
-
hatte vorher 4.0 .
das ist das ergebnis vom auslesen nach der neuinstalation?debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ac.4a.83.07.00.00-63
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failedFlash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000U-Boot 1.2.0 (Tuxbox) (Apr 20 2007 - 18:43:36)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ...... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNETOptions:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694081 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 694017 Bytes = 677.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (mdimage@linuxmdteam) (gcc version 3.4.4) #4 Fr Apr 2
0 18:39:16 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:f5:7a
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x003c0000 : "root (SquashFS)"
0x003c0000-0x007e0000 : "var (JFFS2)"
0x007e0000-0x00800000 : "FLFS (U-Boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting pid 109, console /dev/console: '/etc/init.d/start'Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
mv: unable to rename `/lib/tuxbox/plugins/mdextra.cfg': No such file or director
y
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 4500 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini Exp $
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error
rm: cannot remove `/var/etc/.sectionsd': No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[sectionsd] getUTC: read: Connection timed out
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[dmx.cpp184] read(fd, buf, n): Connection timed out
zap failed!
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out -
zeigt der letzte log was worauf man auf den fehler schliesen könnte
Danke schonmal für die mühe:-) -
Mit was versuchst Du eigentlich zu gucken? Karte, EMU oder was? Log ist auf alle Fälle schon besser wie das erste, bin mir nicht ganz sicher, aber Fehler sind noch drin..
Veruchst Du da was mit CS??[yhttpd] Webserver starting...
[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error
rm: cannot remove `/var/etc/.sectionsd': No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino) -
[color="White"]Hast gleich PM! Habs mal gerichtet....sollte zumindest nun alles gehen! (auch auf Philips-Sat tested!)[/color]
-
[color="White"]habe mal die (MG") eingesetzt, auch bei [color="Red"]*Neustart*[/color] alles vorhanden, Config angepasst, FTAs gehen alle genauso gut, kenne nun deine Satanlage/Box nicht (Werte...) aber prinzipiell funzt alles wie es sollte! Bin trotzdem (KW)-verwöhnt, konnte ich mir nun nicht verkneifen....
[/color] -
[color="White"]dann ändere mal in der (Zapit.conf) die Werte, eventuell bringt es Besserung, Image-technisch ist da also sicher kein Fehler, sollte also anders bereingt werden, deine [color="Red"]Signal/Ber-Werte[/color] auch mal posten![/color]
[color="Red"]Beispiel für Änderung der (Zapit.conf) Werte können nach oben/unten testend verändert werden![/color]
Zitatlnb0_OffsetLow=9754500
lnb0_OffsetHigh=10609000
lnb1_OffsetLow=9757500
lnb1_OffsetHigh=10609000 -
[color="White"]also von den Werten her eigentlich nichts negatives zu finden....versteh wer will, anderes Image probiert? Sollten dann ja dieselben Probs auftreten!? Tunertreiber Ucodes gespielt, kann leider auf unseren Boxen das *Phaenomen* nicht nachvoll-ziehen, mit deinem Image.....bin momentan am überlegen. Ich schick dir gleich nochmal was per PM...testen und erneutes Feedback erwünscht![/color]
-
[color="White"]Beim (KW) gibts den sogenannten *Tune-Mode* der kann Wunder wirken, ob das beim MD der Fall ist weiss ich gerade nicht, solltest das als Alternative eventuell auch mal rauf-flashen und den *Tune-Mode* versuchen, schaden kanns ja nicht wie ich finde! Was am besten auf den *Philips-Sat* läuft: April Image (letztes Jahr) KW...bei den neueren Varianten kann ich davon nicht 100% sprechen, muss aber bei anderen Boxen nicht sein![/color]
-
Zitat
gerade noch kw ausprobiert mit dem selben ergebnis (auch mit tunemode)
Ist was in der box defekt oder?[color="White"]das ist dann wohl nicht auszuschliessen.....wurde ja alles versucht wie ich finde....!? Tuner mal messen, müsstest mal hier im Board suchen, gibts wohl mehr Help zu![/color]
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!