Neu eingetroffen....
Hat jemand dieses Image schon drauf und kann berichten ?

Enigma2 image für TF 7700HDPVR
-
-
anscheinend nicht....
Ist doch ein absoluter Hammer, das TF nun auch in die Gemeinde von Linux aufgenommen wurde !:biggrinthumb:
Habe es deshalb auch hier hochgeladen:
http://ulc.zebradem.com//filemanager.p…-%20Z/Topfield&
. -
leute, ich glaub das wird was ganz großes. werds gleich mal testen.
ich finde, damit hat topfield nen eigenen bereich unter "Sonstige Reveiver" verdient!
am meisten interessiert mich die .mkv-wiedergabe...
ich werde berichten. -
Kommt da auch etwas für den TF 7700 HCCI?
Kann man das selber irgendwo verfolgen? -
Zitat von bonzaii;280422
Kommt da auch etwas für den TF 7700 HCCI?
Kann man das selber irgendwo verfolgen?
bis jetzt noch nichts für HCCI aufgetaucht....
im TF Forum ist eine Unterrubrik für Enigma2 eröffnet worden, da kannste alles lesen....
.
hier -
Es geht weiter :palamakia:
################################################## #######
# #
# Team Ducktales' Enigma2 image for the TF7700HDPVR #
# #
# Release 0.2 #
# #
################################################## #######
The provided image is based on the Linux operating system and includes
the Enigma2 PVR application. Please read this document carefully before
installing the image.
New features and bugfixes (since 0.1)
-------------------------------------
+ Feature: first beta support for CAMs (upper slot only)
+ Feature: added flashing topfield.tfd (if present on the USB stick) to
make going back to Topfield firmware easier
+ Feature: freed 16 MB of unused RAM
+ Feature: migrated system partition to ext3 filesystem
+ Feature: migrated to stlinux-2.6.17.14-0041
+ Feature: installation control file (noformat, noupdate, nopartition,
keepsettings, usbhdd)
+ Feature: enabled installation to a USB HDD (option usbhdd)
+ Feature: improved emergency shutdown policy
+ Change: removed mapping of the keys V- (left) and V+ (right) to volume control
to avoid problems in various menus. The volume can now be adjusted with
the keys |< and >|.
+ Fix: the keys V-/V+ can now be used to change entries in the timer menu and
to scroll page up/page down.
+ Fix: updated the settings for Astra 19°° and added new satellites.xml for
orbital position 13.0, 19.2 and 23.5 east
+ Fix: applied the SATA patch to fix interactions with HDDs
+ Fix: fixed repeating Diseq commands delaying tuning up to 20 seconds
+ Fix: added swap to /etc/fstab
+ Fix: added the dvr1 device for recording
+ Fix: added updating the network settings to the rcS (activates the user
settings made in e2)
+ Fix: fixed the issue with "SID not found in PAT" and some scan problems
+ Fix: fixed the issue with low volume
+ Fix: improved shutdown behavior so that the PVR is not turned off before
the kernel finished unmounting file systems
+ Fix: updated Vader skin (DNS settings, timer)
+ Fix: swapped keys zapUp and zapDown
+ Fix: Daylight Saving Time
- Fix: no video on the FIRST start after installation
Unsupported features and known problems
---------------------------------------
- The only supported tuner type is DVB-S2 CX24116/CX24118.
- Timeshift does not work yet.
- Rewind does not work properly. Sometimes enigma2 freezes when rewinding.
"Jump back" can be used instead (see playback keys).
- Samsung LCD TVs will probably have problems with the default resolution
576i.
- HDD shuts down and spins up very often, workaround - disable HDD standby in
e2 settings.
- With "AC3 downmix on" there is no sound on optical when AC3 stream is
selected. With "AC3 downmix off" the system migt freeze when zapping to
channels with AC3.
- After stopping the playback of a an active recording (a kind of timeshift)
the screen remains black and does not recover until the receiver is restarted. -
kann das neue image nirgends finden... außerdem ist doch schon wieder n kleiner bugfix 0.2.1 draußen oder ni?
-
Zitat von paul-peter;285456
kann das neue image nirgends finden... außerdem ist doch schon wieder n kleiner bugfix 0.2.1 draußen oder ni?
ja.....
jetzt gibt es aber auch schon die Version 0.3 !
und noch eine "Spezielle" .... mit dem blue panel..... -
Zitat von loudness;289706
ja.....
jetzt gibt es aber auch schon die Version 0.3 !
und noch eine "Spezielle" .... mit dem blue panel.....
falls es doch noch ein paar TF Freunde hier gibt:
gerade erschienen.....Enigma2 CIe2T Topfield 7700/7710 "MOD 2.0"
Modified E2 by CroTeam CIe2T
based "Team Ducktales"(Release 0.3.0 )
The provided image is based on the Linux operating system and includes
the Enigma2 PVR application. Please read "ReleaseNotesTF7700" document carefully before
installing the image.- added blue panel
- added Mbox.emu
- fixed some bugs
- for HDPVR models (not confirmed for HSCI) -
Hat denn schon jemand das bluepanel ausprobiert ?
Da ist ja bis jetzt nur "Mbox" drin, ist ja wohl für cs gedacht...
Wie bekomme ich da andere emus ( mgcam, camd3 usw. ) rein ?
oder geht das noch nicht ? -
Ich brauche solch ein Update für meinen TF 7700 HCCI ... möglichst jetzt
Ist denn die Hardware so unterschiedlich?
-
Zitat von loudness;289706
ja.....
jetzt gibt es aber auch schon die Version 0.3 !
und noch eine "Spezielle" .... mit dem blue panel.....Zitat von bonzaii;291068Ich brauche solch ein Update für meinen TF 7700 HCCI ... möglichst jetzt
Ist denn die Hardware so unterschiedlich?
gute Frage... da soll wohl nichts kommen.....
habe dazu etwas in nicht Deutscher Sprache von den Machern gefunden....
Vielleicht kann ja ein User das ggf. übersetzen....
""
za model 7700HSCI koji nema mrezni adapter nema svrhe enigma
ja imam TF7010HDPWR i jako lijepo radi
zao mi je da ti ova enigma ne moze pomoci za tvoj box
namijenjena je za boxove s mreznim adapterom
jednostavno se ubacuje na HDD svi potrebni filovi su u zipu sa kratkim uputama
ako netko ima problem slobodno neka pita ovdje na forumu
molim vas ne na PM
jer je bolje da svi skupa nesto naucimo to i je svrha foruma""
Viel Spass.... -
wenn man wüßte, welche Sprache das ist ..
-
"Modell für 7700HSCI, dass es keine Netzwerk-Adapter nicht über den Zweck der Rätsel
Ich habe TF7010HDPWR und sehr schöne Arbeit
ZAO mi je da ti diesem Rätsel können nicht helfen, für Ihre Box
für boxove Netzwerk-Adapter
einfach auf der Festplatte alle erforderlichen filovi in zipu mit kurzfristig
wenn jemand ein Problem hat sich, ihn fragen, hier im Forum
Ich bitte Sie nicht auf PM
weil es besser ist, dass alle von einer Sache, die dem Zweck des Forums"Ich nehme an der7700HSCI hat keinen Netzwerkanschluss.
-
Das Image ist nur zu empfehlen.....
läuft für das frühe beta stadiun erstaunlich stabil...:wink: -
Hat schon jemand HD-Skins zum laufen gebracht ?
1:1 von der Kathi scheinen nicht zu funktionieren.
Muss man dafür noch was anpassen? -
Version 0.3.1 ist online......
New features and bugfixes (since 0.3.0)
---------------------------------------
+ Feature: added support for the lower CI slot
+ Feature: more than 2 simultaneous recordings are possible
+ Feature: added VFD support for displaying some UTF-8 characters (ä, ö, ü)
+ Feature: added VFD support for displaying strings in upper case
(to display strings in lower and upper case comment out the line
"/bin/tffpctl --allcaps 1" in /etc/init.d/rcS)
+ Update: incorporated the new enigma2 version (05/30/2009)
+ Update: incorporated the new web interface version (06/04/2009)
+ Fix: disabled the HDD standby by default to avoid annoying spindowns/spinups
+ Fix: fixed the issue with multiple recordings on the same transponder
(timeshift also works while recording on the same transponder)
+ Fix: fixed fast forward for MP3 in MediaPlayer
+ Fix: increased the framebuffer memory to 12MB to allow HD skins
+ Fix: added missing file in Tuxtxt plugin
+ Fix: made timeshift start more stable
+ Fix: fixed mkv video with h264 or divx/xvid
+ Fix: reduced picture artifacts when browsing through e2 menus -
auch wenn es anscheinend wenige TF User hier gibt....
0.3.2 verfügbar....
New features and bugfixes (since 0.3.1)
---------------------------------------
+ Feature: added support for scrolling VDF strings
(settable with the command-line tool tffpctl)
+ Fix: fixed the issue with transponder blocked by a recording
.vielleicht interessiert es aber jetzt mehr......
.
am WE erscheint ein AAF Image fused on 0.3.2
.
na ? -
nun ist es da !!!
.
TDT_E2_AAF_RISING_SUN_TF7700HDPVR-Beta
Danke an EME für das Bootbild und matze70 für die Settings.
Image Info
Basis TDT release 0.3.2 vom 01.07.2009
Danke an Team Ducktales für das super Basis Image und alle die dieses Image ermoeglicht und getestet haben.
AAF Erweiterungen:
+ AAF Rising Sun Bootbild
+ Brushed-Alu-HD-Skin 1.2
+ Patch 6.7.0
+ AddonManager 1.72
+ neue Settings von Matze
.
.
Kernstück ist das AAF Panel (Eigenes Menü mit erweiteren Einstellungen und Funktionen)
+ Automount für USB und eigetragene CIFS/NFS Freigaben
+ BlueKey Action (Blaue Taste selber belegbar mit Wunschplugin)
+ optionaler NTFS support
+ Optionaler Samba Server
+ USB2Serial Treiber (optional aktivierbar - für externe Kartenleser)
+ VFD Display einstellungen (momentan erstmal Uhrzeit an/aus)
+ Softcampanel (zum verwalten von Softcams)
+ AddonManager (installieren und deinstallieren von Zusatzfunktionen/Programmen)
+ UpnpFS Support
+ Fehlende Dateiendungen im MediaPlayer hinzugefügt (inklusive *.rec)
..
:clap::clap::clap: -
Ich habe riesenprobleme E2 aufzuspielen. Wer kann Helfen
Auch bei mir funzt es nicht. Habe schon 2 USB Sticks ausprobiert. auch mit dem HP Programm formatiert
immer an der gleichen stelle funzt nichts mehr mach punkt 6 zählt er runter und es erscheint sie Meldung "Fail Kernel"
Hier der LogWriting inode tables: done
Writing superblocks and filesystem accounting information: doneThis filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Setting up swapspace version 1, size = 271430144 bytes
Installing root file system
gunzip: /instsrc/rootfs.tar.gz: No such file or directory
tar: short read
Flashing U-Boot settings
189+1 records in
189+1 records out
128+0 records in
128+0 records out
Flashing kernel
dd: can't open '/instdest/boot/uImage': No such file or directoryPlease press Enter to activate this console.
Habe auch schon enter gedrückt nichts passiert
__________________
TF 7700HDPVR mit 500GB Seagate Samsung 50" -
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!