Orginal Coolstream HD1 Image Sammel Thread

Hier mal die erste Image für die CoolstreamHD1

[color="Lime"]Download -> coolstream-07091434.img[/color]

[color="SeaGreen"]2. Alle Receiver - Module und DVB S - C - T / 4. Receiver A - G[/color]

Image vom 24.07.2009

:::::: File-Info ::::::

Coolstream Image - 24.07.2009

• fixed Audio Volume not linear for the human ear
• fixed If volume is set to 0 and box saves this, on restart the
• volume is 100% (but in UI shown with 0)
• fixed Leaving a service, videobuffer not cleared
• fixed Videotext - lange Wartezeit nach Seiteneingabe
• fixed HDD Menu (format)
• probably fixed segfault on press STOP after watching recorded movie
• added OSD setup in wizzard

[color="Lime"]Download[/color]

[color="SeaGreen"]2. Alle Receiver - Module und DVB S - C - T / 4. Receiver A - G / Coolstream HD[/color]

Image vom 10.08.09

[color="Lime"]Coolstream HD-1 Firmware[/color]

Changelog 10.08.2009:

TO USE THIS FIRMWARE, PLEASE BE SURE YOU ARE UPDATED
OR HAVE KERNEL Version 2.6.26.8 !!!

* Fix recordings for some channels where apid not available
* Fix some crashes or some Live Channels disturbed Picture after press Stop on Playback
* Show right active event on VFD Display on Playback some movie
* Fix "no sound" on Live Channels when in Playback or Timeshift the remote buttons " Pause FWD STOP "
* are pressed.
* Add in Audio Menu choice for Spdif output signal
* Fix some crashes in teletext with cache enabled
* Show corect names of Favorites in different languages
* Using remote button "Skip+" can you switch to Next Videomode Pan&Scan, Letterbox etc
* More filesystems are supported now

Videocut enabled, now you are able to jump over advertising, when you play the movie just push blue button
and select "jump over" and again blue button to stop, on next play you will jump smooth over it.

[color="Lime"]Download[/color]

[color="SeaGreen"]2. Alle Receiver - Module und DVB S - C - T / 4. Receiver A - G / Coolstream HD / Imagen[/color]

Image vom 02.09.2009

[color="Lime"]Coolstream Image - 02.09.2009[/color]

- Check for hotplug fixes
- Added power manager base for testing
- Checkt if no audio after ff/rewind fixed
- check if diseqC reset oka
- fix menu for Cifs

[color="Lime"]Download[/color]

[color="SeaGreen"]2. Alle Receiver - Module und DVB S - C - T / 4. Receiver A - G / Coolstream HD / Imagen[/color]

Image vom 09.09.09

[color="Lime"]Coolstream HD-1 Firmware vom 09.09.09[/color]

-Seems stupid PES Driver works now:
-Teletext and DVB Subtitles should be okay
-Fix for USALS, should be okay now
-Option to switch off/on HD bouquet. Service reload needed atm
-New default rdate server
-Change default sat position to 0

[color="Lime"]Download[/color]

Image vom 20.09.2009

Coolstream Image vom 20.09.2009

- Some Video/Audio driver fixes
- Fix manual scan stop with NIT enabled
- Update epg-detail window on current event change
- Possible error parsing EPG fix
- Modify Streaminfo

[color="Lime"]Download[/color]

[color="SeaGreen"]2. Alle Receiver - Module und DVB S - C - T / 4. Receiver A - G / Coolstream HD / Imagen[/color]

Image vom 07.10.2009

[color="Lime"]Coolstream HD1 Image vom 07.10.2009[/color]

Change-Log 07.10.09

* Add PMT dynamic updates
* Fix problem with crypted Videotext
* Save scan.conf on exit
* Remove "none" satellite in scan conf
* Some cosmetics
* Some changes in tuner driver
* (seems some big dishes was affected on high snr)
* Maybe you will need some cold boot after Update!!
* There some DiseqC changes too as few usals rotor types
* wasnt work proper.

Fix pmt problem from yesterday Software

[color="Lime"]Download[/color]

Coolstream Image 071109 ->with S02 and CCcamServer Support

[color="Lime"]Coolstream Image with S02 and CCcamServer Support - 071109[/color]

Have here views an image for people who only want to look found.

This image is based on the original image of 06.10.09 (for the maps is simply the best story)
It supports cards in card reader (6MHZ) such as an S02 and a few more (D02 / S01 / Arena .......)
[color="Lime"]In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.[/color]
A few scripts implicating have come to the beautiful and small pictures .....
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.

So much fun with it and as I said just found .....

The level is the way:

Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 72% /

Zitat

[color="Lime"]Außerdem kannst du das cccamd.list mit ihren eigenen Daten füttern und kannst dann auf ein CccamServer zugreifen[/color]

[color="Lime"]Download[/color]

Coolstream HD1-Image vom 18.12.200

[color="Lime"]Orginal-Coolstream HD1-Image vom 18.12.2009[/color]

Zitat

[color="Red"]Warning:[/color]

This release will upgrade your Kernel (16 DEC) on first boot !!!
Please dont power off your receiver bevore Upgrade is done !

- ALSA Sound driver added
- Add new demux driver
- Fix AR when play foreign files
- upnp browser for audio files To access the server push OK on remote, to browse the files use the LEFT arrow key, again OK button to play songs
- Fix bad Picture after timeshift
- Picture errors when optimizers (filter) are active Is disabled on default!
- Add 14:9 Video mode for 4:3 Transmissions
- Internet Radio fixes, there we got some crashes reportet
- Fix Common Interface for some Modules

Alles anzeigen

Sollte die Interne Festplatte nicht mehr erkannt werden , wegen fehlender interner Spannung bitte die rcS - Datei anpassen in der [color="Lime"]/etc/init.d/[/color]

Zitat

insmod cs_control hdd_power=1

[color="Lime"]Download[/color]

Coolstream Image vom 21.01.2010 online verfügbar

[SIZE="4"][color="Lime"]Coolstream Image vom 21.01.2010 online verfügbar[/color][/SIZE]

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.

[color="Red"]Warning:[/color]

[color="Red"]This release will upgrade your Kernel(29 DEC) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done![/color]

Zitat

- Fix many Bugs from the last release
- Fix Video driver for some SD frameing channels
- Rework DVB Subtitles, please give reports if some syncron
problems still
- Many changes regarding OSD, big thx to db2w guys for it
- Fix frequencies (mhz) "rounding" trouble for Cable tuner STB
- Add TTx subtitle over green button (same as dvb subs )
- CI handling update

Alles anzeigen

[SIZE="5"][color="Lime"]Online verfügbar [/color][/SIZE]

Coolstream HD1 Image - Flash / USB Image by Striper

[color="Lime"]Flash / USB Image by Striper vom 18.02.2010[/color]

[color="Lime"]- Download for Flash[/color]
[color="Lime"]- Download for USB[/color]

Zitat

- SVN Revision 367
- busybox 1.16.0
- dark-theme
- neutrino startet mit "-r 128 80" --> Ist lesbare Schrift
- natives top/ps
- hotplug
- native e2fsprogs
- autofs
- openssl 0.9.8
- vsftpd 2.2.2
- natives flashcp
- optimierte Größe durch geänderte Compilerflags

Plugins:

- Tuxbox Commander
- getrc
- input
- msgbox
- shellexec -> mit shellexec.conf zum rumspielen :wink:
- BuliTore 2.2
- Buli1Tab

- Ihr müsst ggf. die Netzwerksettings nach dem ersten Booten anpassen da ich eine feste IP drin habe (192.168.0.6).
- Einfach den Inhalt des Tarballs entpacken und auf euren USB-Stick kopieren. Dann davon [color="MediumTurquoise"]nach dieser Anleitung[/color] booten (starten).
- Wer unbedingt flashen will macht das auf eigenes Risiko!

Alles anzeigen

Original Coolstream-Image vom 24.02.2010

[color="Lime"]Original Coolstream-Image vom 24.02.2010[/color]

Firmware ist auch über OnlineUpDate verfügbar.

[color="SeaGreen"]Download[/color]

Zitat

Do not perform updates using any data other than the official update data from our website.

Using Software Updates You expressly acknowledge and agree that use of this Software is at your own risk.

In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.

[color="Red"]Warning:
This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done![/color]

- Add Automatic Audio / Subtitle selection in
International Settings
- Fix some more UTF-8 for VFD
- Some small fix for Video
- Fix video driver for mpeg4 SD resolution
channels
- Scale down dvb subtitle for better view
- Improve teletext subtitle
- Auto-start/remember teletext subtitle
- Analog sound on/off support
- Disable zap to different TP from channel
list if recording
- Restore analog audio stereo/mono mode on zap
- Fixes for webif radio streaming bouquets/channels lists
- fta channels scan option

Alles anzeigen

Coolstream-Image vom 23.03.2010

[SIZE="4"][color="Lime"]Orginal-Coolstream-Image vom 23.03.2010[/color][/SIZE]

[color="SeaGreen"]Download[/color] oder [color="SandyBrown"]Online verfügbar
[/color]

Zitat

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [color="DeepSkyBlue"][email protected][/color] for any questions about our Software.

[color="Red"]Warning:[/color]

This release will upgrade your Kernel (Feb 7) on first boot if not already done !!
Please dont power off your receiver bevore Upgrade is done !

23.03.2010
- New yWeb release 2.8.0.2, thx to yjogol
[color="Cyan"]([color="DeepSkyBlue"]Home*-*www.yjogol.com[/color])[/color]
- OSD menu settings reorganized
- New Media submenu
- Add Full LCD/CRT presets, Choose The Appropriate One for your TV set
- Rework Network Menu, add Hostname, seem to be needed
- Some fixes for Satfinder and Show tuner locked or not using green or red radar color
- Reset CI after standby option and CI Reset, move CI option in Mainmenu
- Rework teletext, add option to select teletext font, new monospace font to support more languages
- Add Fastscan for BENELUX
- Tune subtitling

Alles anzeigen

Coolstream Image vom 15.06.2010

[color="SeaGreen"]Original Coolstream HD-1 Firmware vom 15.06.2010[/color]

[color="Lime"]Download[/color]

Zitat

[color="Red"]Warning:[/color]
This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!

Diese Version wird euern Kernel(am 7. Febr) beim ersten boot, wenn nicht bereits getan, ändern!!!
Bitte den Receiver nicht ausschalten, bevor das UpGrade fertig ist.

15.06.2010
- Menu for CSTLink (CEC), enable/disable features
- Add AAC Sound support
- Change some defaults for faster first Setup
- Fix Screen default
- Rework coolstream API
- Add Coolstream Neo drivers/gui support

Alles anzeigen

Coolstream Image vom 20.06.2010

[SIZE="4"][color="Lime"]Software Update Wizard - Agreement[/color][/SIZE]

[color="SeaGreen"]Download[/color]

Führen Sie die Aktualisierungen nur durch, wenn nur die offiziellen Aktualisierungsdaten von unserer Website verwendt werden.
Das Verwenden von dieser Softwareaktualisierungen erkennen Sie ausdrücklich an, dass die Gebrauch dieser Software auf eigenen Gefahr erfolgt.
In keinem Fall wird Coolstream LTD für irgendwelche Schäden verantwortlich sein.

[color="Red"]Warning:[/color]
Diese Ausgabe wird Ihren Kern (am 7. Febr) auf dem ersten boot, wenn nicht bereits getan geupdatet!!!
Bitte den Receiver nicht ausschalten, befor das UpDate fertig ist!

20.06.2010
- aac record playback for movieplayer
- some fixes for FP driver
- First Setup changes
- improve Updates check

Original Coolstream HD-1 / NEO

Original Coolstream HD-1 / NEO -Firmware vom 25.07.2010

[color="Lime"]Download[/color]

Zitat

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

Contact [email protected] for any questions about our Software.

Warning:

This release will upgrade your Kernel on first boot if not already done !!!
Please dont power off your receiver bevore Upgrade is done !

25.07.2010

- Enable Frontpanel Standby button to reactivate STB from deep state
- Some fixes for video driver, where some "freezes" reported
- Tuner driver fixes for 8psk

Alles anzeigen

Original Coolstream HD-1 / NEO (1.87)

[color="SeaGreen"]Original Coolstream HD-1 / NEO Firmware vom 23.08.2010[/color]

[color="Lime"]Download[/color]

Zitat

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.

[color="Red"]Warning:[/color]

This release will upgrade your Kernel on first boot if not already done !!!
Please dont power off your receiver bevore Upgrade is done !

23.08.2010 / v1.87

Critical Update for version 1.86

- "OSD HIDE" using EPG PLUS fixed
- Show Infobar on EPG event change

Alles anzeigen

Original Coolstream HD-1 / NEO F

[color="DeepSkyBlue"]Original Coolstream HD-1 / NEO Firmware vom 17.09.2010[/color]

[color="SeaGreen"]Download [/color]

Zitat

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.

[color="Red"]Warning[/color]:

[color="DarkOrange"]This release will upgrade your Kernel on first boot if not already done !!!
Please dont power off your receiver bevore Upgrade is done ![/color]

[color="Lime"]17.09.2010 / v1.88[/color]

- Fix Frontpanel driver rework wakeup Function, make menu more responsive to remote

NOTE (NEO): If you set a timer and shutdown STB the LEDS will blink to remind you about it.
After recording done, STB will shutdown himself if user dont cancel (messagebox will appear on
the screen)

- Fix reset STB from frontpanel buttons You can do this using [MENU + Left] or [VF + UP]
- Dont stop playback in movieplayer when a timer starts
- Dont freez OSD if CSTlink(CEC) used and some Function not supported
- Add discrete codes for Logitech
- Fix some crash using icecast (internet radio)
- Update to yweb 2.8.0.7

Alles anzeigen