Hallo Leutz,
Hatte grosse Prob.s mit der Box sie in debug zu kriegen,dann ein Img drauf und nun kommt das:
U-Boot 2009.08 (Tuxbox) (Nov 12 2009 - 15:56:00)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ............... done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x200000
### FS load complete: 507325 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.6-dbox2
Image Type: PowerPC Linux Kernel Image (lzma compressed)
Data Size: 507261 Bytes = 495.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.6-dbox2 (FlatTV@devel) (gcc version 3.4.6) #40 Do 12. Nov 1
6:16:13 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw rootfstype=jffs2 console=ttyS0,9600
dbox_duplex=
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30832k available (1140k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:7a:c5
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2+lzma)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.4 (2009-11-12 15:57:48 CET)
starting pid 9, tty '': '/etc/init.d/rcS'
mount: using /etc/fstab
udhcpc (v1.14.4) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
insmod: ves1x93.o: module not found
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
avia_av: AVIA 500 LB4 found, sptsfix is on
avia_av: microcode verify: 8806 errors.
avia_av: imem verify: 40 errors
avia_av: timeout waiting for decoder init to complete. (00000001)
insmod: init_module: avia_av: Input/output error
insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/avia_av.o': Operation not
permitted
insmod: unresolved symbol avia_av_set_stc
insmod: unresolved symbol avia_gt_gv_copyarea
insmod: unresolved symbol avia_gt_ir_exit
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pig_show
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_av_write
starting pid 112, tty '': '/etc/init.d/start'
Please press Enter to activate this console.
$Id: cdkVcInfo.cpp 1165 2009-11-04 08:16:00Z FlatTV $
/bin/lcdmenu: /lib/libpng12.so.0: no version information available (required by
/lib/liblcddisplay.so.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[lcdmenu] /bin/enigma was not found, entry Enigma discarded
[lcdmenu] /bin/radiobox was not found, entry Radiobox discarded
[lcdmenu] /bin/lcars was not found, entry Lcars discarded
[lcdmenu] /etc/init.d/initialize was not found, entry Initialize discarded
[lcdmenu] Only one GUI was found, selecting that
[Usercontroll] usercontroll by PPCBoot - fixed by Trapped $
[Usercontroll] Starting Usermanagment
[Usercontroll] No Usermanagment available, given up to Neutrino
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.314 2009/10/22 20:48:22 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 3 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
[timerd] woke up from timer? false!
cat: can't open '/proc/bus/avia_version': No such file or directory
[: avia600: unknown operand
emu_starts: Start Emu
/var/plugins/emu_handling: emu_handling
ACTION: start
EMU: .camd2
FLEX:
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
/var/plugins/emu_handling: start camd2
$Id: zapit.cpp 1183 2009-11-11 19:39:06Z FlatTV $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[frontend] uncommitted_switch_mode 0 auto_fec 0
[camd2] /dev/dvb/adapter0/demux0: No such file or directory
/var/tuxbox/config/zapit/services.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
[video.cpp:CVideo:40] /dev/dvb/adapter0/video0: No such file or directory
[CVideo::setVideoFormat] output format: 4:3(LB)
rdate: bad address 'time.fu-berlin.de'
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
[Neutrino-Check] License valid. Name of User: NG-Return
starting /bin/neutrino
[neutrino] frameBuffer Instance created
rdate: bad address 'time.fu-berlin.de'
/dev/fb/0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
rdate: bad address 'time.fu-berlin.de'
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
Kann jemand damit was anfangen?
Was ist im Eimer?
Dank im Voraus
Erbse
