Beiträge von Erbse7

  • Problem mit nokia 2x

    Frohes Fest wünsch ich,
    Hab jetzt mal das Zebra-Img draufgemacht und das kam dabei heraus:
    tftp: timeout
    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: LCD init error -1
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-54.01.1a.07.00.00-5b
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040

    will verify ELF image, start= 0x800000, size= 163284
    verify sig: 262
    Branching to 0x40000


    U-Boot 1.2.0 (Tuxbox) (Apr 24 2009 - 03:01:50)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . | . / - \ . | / - \ . | / - \ done.
    env: found console with value ttyS0
    env: found lcd_inverse with value 0
    env: found lcd_contrast with value 15
    FB: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET
    LCD: ready

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 1 0
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 670495 bytes loaded to 0x100000
    ............................................................... done
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 670431 Bytes = 654.7 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.37-dbox2 (zebradem@Zebradem-Image) (gcc version 3.4.6) #72 Fr 24. Apr 03:02:18 CEST 2009
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfstype=squashfs
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    squashfs: version 3.0 (2006/03/15) Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    half-duplex mode enabled
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:7a:c5
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "FLFS (U-Boot)"
    0x00040000-0x004c0000 : "root (squashfs+lzma)"
    0x004c0000-0x00800000 : "var (jffs2)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.7.2 (2009-04-24 03:11:30 CEST)
    mount: using /etc/fstab
    mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such device
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    tuxbox: no IDE-Interface detected
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    cam: no firmware file found
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av: microcode verify: 8806 errors.
    avia_av: imem verify: 40 errors
    avia_av: timeout waiting for decoder init to complete. (00000001)
    insmod: init_module: avia_av: Input/output error
    insmod: unresolved symbol avia_av_set_stc
    insmod: unresolved symbol avia_gt_gv_copyarea
    insmod: unresolved symbol avia_gt_gv_show
    insmod: unresolved symbol avia_gt_gv_get_clut
    insmod: unresolved symbol avia_gt_gv_get_blevel
    insmod: unresolved symbol avia_gt_gv_set_input_size
    insmod: unresolved symbol avia_gt_gv_set_pos
    insmod: unresolved symbol avia_gt_gv_hide
    insmod: unresolved symbol avia_gt_get_info
    insmod: unresolved symbol avia_gt_gv_set_size
    insmod: unresolved symbol avia_gt_gv_set_input_mode
    insmod: unresolved symbol avia_gt_gv_set_clut
    insmod: unresolved symbol avia_gt_gv_set_blevel
    insmod: unresolved symbol avia_gt_gv_get_info
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    insmod: unresolved symbol avia_gt_ir_exit
    insmod: unresolved symbol avia_gt_ir_receive_pulse
    insmod: unresolved symbol avia_gt_ir_receive_data
    insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position
    insmod: unresolved symbol avia_gt_ir_send_buffer
    insmod: unresolved symbol avia_gt_ir_queue_pulse
    insmod: unresolved symbol avia_gt_ir_init
    insmod: unresolved symbol avia_gt_ir_set_duty_cycle
    insmod: unresolved symbol avia_gt_ir_set_frequency
    insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position
    insmod: unresolved symbol avia_av_set_sample_rate
    insmod: unresolved symbol avia_gt_pcm_play_buffer
    insmod: unresolved symbol avia_gt_pcm_stop
    insmod: unresolved symbol avia_gt_pcm_set_signed
    insmod: unresolved symbol avia_gt_pcm_set_endian
    insmod: unresolved symbol avia_gt_pcm_set_rate
    insmod: unresolved symbol avia_gt_pcm_set_width
    insmod: unresolved symbol avia_gt_pcm_poll
    insmod: unresolved symbol avia_gt_pcm_set_channels
    insmod: unresolved symbol avia_av_get_sample_rate
    insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
    insmod: unresolved symbol avia_gt_pcm_get_block_size
    insmod: unresolved symbol avia_gt_pig_show
    insmod: unresolved symbol avia_gt_pig_set_stack
    insmod: unresolved symbol avia_gt_pig_set_size
    insmod: unresolved symbol avia_gt_pig_set_pos
    insmod: unresolved symbol avia_gt_pig_hide
    DVB: VES1820(0): pwm=0x48
    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
    insmod: unresolved symbol avia_av_stream_type_set
    insmod: unresolved symbol avia_av_register_video_event_handler
    insmod: unresolved symbol avia_av_set_audio_attenuation
    insmod: unresolved symbol avia_av_write
    insmod: unresolved symbol avia_av_pid_set
    insmod: unresolved symbol avia_av_audio_pts_to_stc
    insmod: unresolved symbol avia_gt_dmx_queue_write
    insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
    insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
    insmod: unresolved symbol avia_av_play_state_set_video
    insmod: unresolved symbol avia_av_unregister_video_event_handler
    insmod: unresolved symbol avia_av_get_video_size
    insmod: unresolved symbol avia_av_play_state_set_audio
    insmod: unresolved symbol avia_av_read
    insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
    insmod: unresolved symbol avia_av_new_audio_config
    insmod: unresolved symbol avia_av_set_video_system
    insmod: unresolved symbol avia_av_bypass_mode_set
    insmod: unresolved symbol avia_av_sync_mode_set
    insmod: unresolved symbol avia_gt_dmx_queue_nr_get_bytes_free
    insmod: unresolved symbol avia_gt_dmx_get_ucode_info
    insmod: unresolved symbol avia_gt_vbi_start
    insmod: unresolved symbol avia_gt_dmx_queue_reset
    insmod: unresolved symbol avia_av_napi_decoder_stop
    insmod: unresolved symbol avia_gt_dmx_queue_stop
    insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
    insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
    insmod: unresolved symbol avia_gt_vbi_stop
    insmod: unresolved symbol avia_av_audio_pts_to_stc
    insmod: unresolved symbol avia_gt_dmx_queue_write
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
    insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
    insmod: unresolved symbol avia_gt_dmx_disable_framer
    insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
    insmod: unresolved symbol avia_av_napi_decoder_start
    insmod: unresolved symbol avia_gt_dmx_queue_start
    insmod: unresolved symbol avia_gt_dmx_tap
    insmod: unresolved symbol avia_gt_get_info
    insmod: unresolved symbol avia_gt_dmx_enable_framer
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
    insmod: unresolved symbol avia_gt_dmx_free_queue
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
    insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
    insmod: unresolved symbol avia_gt_dmx_get_stc
    insmod: unresolved symbol avia_gt_accel_crc32
    insmod: unresolved symbol avia_gt_napi_dvr_send
    insmod: unresolved symbol avia_av_write
    insmod: unresolved symbol avia_gt_set_playback_mode
    insmod: unresolved symbol avia_gt_get_playback_mode
    insmod: unresolved symbol avia_av_is500
    insmod: unresolved symbol avia_av_read
    insmod: unresolved symbol avia_av_new_audio_config
    insmod: unresolved symbol avia_av_cmd
    Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz

    msgbox Message-Box Version 1.62
    msgbox <FBIOGET_FSCREENINFO failed>

    Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
    $Id: sectionsd.cpp,v 1.288 2009/02/28 13:57:50 seife Exp $
    [sectionsd] Caching max 6000 events
    [sectionsd] Caching 14 days
    [sectionsd] Caching 6 hours Extended Text
    [sectionsd] Events are old 60min after their end time
    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
    /var/tuxbox/config/mybouquets.xml: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    cat: can't open '/proc/bus/avia_version': No such file or directory
    [timerd] woke up from timer? false!
    [: avia600: unknown operand
    [sectionsd] getUTC: open: No such file or directory
    $Id: zapit.cpp,v 1.425 2009/03/22 22:06:22 rhabarber1848 Exp $
    [frontend] uncommitted_switch_mode 0 auto_fec 0
    /var/tuxbox/config/zapit/services.xml: No such file or directory
    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
    [sectionsd] getUTC: open: No such file or directory
    void controld_main():782
    [aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
    [audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
    [video.cpp:CVideo:38] /dev/dvb/adapter0/video0: No such file or directory
    [CVideo::setVideoFormat] output format: 4:3(LB)
    [CVideo::setCroppingMode] setting to letterbox
    [sectionsd] getUTC: open: No such file or directory
    [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...[sectionsd] getUTC: open: No such file or directory
    OK (Micron/Regular)
    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
    [LCDFONT] Intializing font cache...
    [ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
    [yhttpd] Webserver starting...
    [sectionsd] getUTC: open: No such file or directory
    init(LCD_MODE_BIN): Device or resource busy
    [camd] /dev/dvb/adapter0/demux0: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    neutrino: /lib/libpng12.so.0: no version information available (required by

    Ich hab keinen Schimmer,was das zu bedeuten hat.

    Gruss Erbse

  • Problem mit nokia 2x

    Hallo Leutz,
    Hatte grosse Prob.s mit der Box sie in debug zu kriegen,dann ein Img drauf und nun kommt das:

    U-Boot 2009.08 (Tuxbox) (Nov 12 2009 - 15:56:00)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: ............... done.
    env: found console with value ttyS0
    env: found lcd_inverse with value 0
    env: found lcd_contrast with value 15
    FB: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET
    LCD: ready

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ............................................................... done
    Un-Protected 63 sectors
    ### FS (jffs2) loading 'vmlinuz' to 0x200000
    ### FS load complete: 507325 bytes loaded to 0x200000
    ## Booting kernel from Legacy Image at 00200000 ...
    Image Name: Linux-2.4.37.6-dbox2
    Image Type: PowerPC Linux Kernel Image (lzma compressed)
    Data Size: 507261 Bytes = 495.4 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.37.6-dbox2 (FlatTV@devel) (gcc version 3.4.6) #40 Do 12. Nov 1
    6:16:13 CET 2009
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 rw rootfstype=jffs2 console=ttyS0,9600
    dbox_duplex=
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30832k available (1140k kernel code, 336k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    half-duplex mode enabled
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:7a:c5
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 5 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "FLFS (U-Boot)"
    0x00040000-0x00800000 : "root (jffs2+lzma)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (jffs2 filesystem).
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.14.4 (2009-11-12 15:57:48 CET)
    starting pid 9, tty '': '/etc/init.d/rcS'
    mount: using /etc/fstab
    udhcpc (v1.14.4) started
    Sending discover...
    Sending discover...
    Sending discover...
    No lease, forking to background
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    tuxbox: no IDE-Interface detected
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2 (2 flash chips)
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    insmod: ves1x93.o: module not found
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    cam: no firmware file found
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    DVB: VES1820(0): pwm=0x48
    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
    avia_av: AVIA 500 LB4 found, sptsfix is on
    avia_av: microcode verify: 8806 errors.
    avia_av: imem verify: 40 errors
    avia_av: timeout waiting for decoder init to complete. (00000001)
    insmod: init_module: avia_av: Input/output error
    insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/avia_av.o': Operation not
    permitted
    insmod: unresolved symbol avia_av_set_stc
    insmod: unresolved symbol avia_gt_gv_copyarea
    insmod: unresolved symbol avia_gt_ir_exit
    insmod: unresolved symbol avia_av_set_sample_rate
    insmod: unresolved symbol avia_gt_pig_show
    insmod: unresolved symbol avia_av_stream_type_set
    insmod: unresolved symbol avia_gt_dmx_get_ucode_info
    insmod: unresolved symbol avia_av_write
    starting pid 112, tty '': '/etc/init.d/start'

    Please press Enter to activate this console.
    $Id: cdkVcInfo.cpp 1165 2009-11-04 08:16:00Z FlatTV $
    /bin/lcdmenu: /lib/libpng12.so.0: no version information available (required by
    /lib/liblcddisplay.so.0)
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [LCDFONT] Intializing font cache...
    [lcdmenu] /bin/enigma was not found, entry Enigma discarded
    [lcdmenu] /bin/radiobox was not found, entry Radiobox discarded
    [lcdmenu] /bin/lcars was not found, entry Lcars discarded
    [lcdmenu] /etc/init.d/initialize was not found, entry Initialize discarded
    [lcdmenu] Only one GUI was found, selecting that
    [Usercontroll] usercontroll by PPCBoot - fixed by Trapped $
    [Usercontroll] Starting Usermanagment
    [Usercontroll] No Usermanagment available, given up to Neutrino
    Thu Jan 1 01:00:00 CET 1970
    $Id: sectionsd.cpp,v 1.314 2009/10/22 20:48:22 seife Exp $
    [sectionsd] Caching max 6000 events
    [sectionsd] Caching 3 days
    [sectionsd] Caching 6 hours Extended Text
    [sectionsd] Events are old 60min after their end time
    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
    /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
    /var/tuxbox/config/mybouquets.xml: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    [sectionsd] open dmx: No such file or directory
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    [timerd] woke up from timer? false!
    cat: can't open '/proc/bus/avia_version': No such file or directory
    [: avia600: unknown operand
    emu_starts: Start Emu
    /var/plugins/emu_handling: emu_handling
    ACTION: start
    EMU: .camd2
    FLEX:
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    /var/plugins/emu_handling: start camd2
    $Id: zapit.cpp 1183 2009-11-11 19:39:06Z FlatTV $
    [ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
    .
    [frontend] uncommitted_switch_mode 0 auto_fec 0
    [camd2] /dev/dvb/adapter0/demux0: No such file or directory
    /var/tuxbox/config/zapit/services.xml: No such file or directory
    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld] /dev/dvb/adapter0/video0: No such file or directory
    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
    [aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
    [audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    [video.cpp:CVideo:40] /dev/dvb/adapter0/video0: No such file or directory
    [CVideo::setVideoFormat] output format: 4:3(LB)
    rdate: bad address 'time.fu-berlin.de'
    neutrino: /lib/libpng12.so.0: no version information available (required by neut
    rino)
    [sectionsd] getUTC: open: No such file or directory
    neutrino: /lib/libpng12.so.0: no version information available (required by /lib
    /liblcddisplay.so.0)
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    [Neutrino-Check] License valid. Name of User: NG-Return
    starting /bin/neutrino
    [neutrino] frameBuffer Instance created
    rdate: bad address 'time.fu-berlin.de'
    /dev/fb/0: No such file or directory
    [sectionsd] getUTC: open: No such file or directory
    framebuffer not available.
    FBIOPUT_VSCREENINFO: Bad file descriptor
    FBIOGET_FSCREENINFO: Bad file descriptor
    [neutrino] Error while setting framebuffer mode
    Neutrino exited with nonzero exit status, restarting...
    setPauseScanning false
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    [audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
    nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
    iblcddisplay.so.0)
    rdate: bad address 'time.fu-berlin.de'
    [sectionsd] getUTC: open: No such file or directory
    [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
    [LCDFONT] Intializing font cache...
    [yhttpd] Webserver starting...
    neutrino: /lib/libpng12.so.0: no version information available (required by neut
    rino)

    Kann jemand damit was anfangen?
    Was ist im Eimer?
    Dank im Voraus

    Erbse

  • Keine Netzwerkverbindung

    Moin,

    Ich habe hier ein grosses Prob.Ich versuch hier eine org.Nokia in den debug zu bekommen.Der Bootm.sagt mir ständig,ich solle eine neue Netzwerk-Karte einbauen,weil er die wohl nicht findet.Karte ist eine Realtec schon upgedatet.
    Bei meiner sagem,wo schon ein Image drauf ist ,funzt alles ohne Fehler.die serielle Schnittstelle ereiche ich über einen Adapter usb auf seriell.Auch das geht mit einem FTP Prog.Bloss die orginale will nicht erkannt werden.

    Kennt jemand das Problem?
    Gruss Erbse

  • O2 surf Stick

    Moin an Alle,
    Weiss jemand,wie ich über einen Stick mit einer Dbox2 ins Netz komm?Hab mir das Teil für den Garten gekauft und kriege jetzt aber keine Verbindung.Die Netzwerk Basis steht auf 192.168.1.1 und die Box hat Verbindung mit dem Lappi.

    Danke im Voraus
    Erbse

  • Prob.mit Netgear

    Hallo und ein gesundes neues Jahr,

    Habe ein Sharing eingerichtet und getestet.Bei mir zu Hause funzt alles tip top mit ner Fritzel,aber beim Kollegen geht nischt.Das Teil heisst Netgear RP614v3.Schon alleine die Portfreigabe ist ein Graus.Wenn ich die Route freigeben will,muss ich in der Subnetmaske 4x 255 einschreiben,sonst krieg ich die IP der Box nicht rein.Wenn ich die Subnetzmaske in der Box ändere,komm ich nicht mehr ins Netz.Gibts da evtl.einen Trick oder soll ich empfehlen einen Neuen zu kaufen.

    Dank im voraus
    Erbse

  • DBOX 2 KEIN EMPFANG

    Mion,
    Signal ok?Ich mein bei der Sagem,nicht bei dem Probereciver.Die Settings mit geladen? Sendersuchlauf prob.?

    Mal den Bootlog auslesen und mal posten.Img-Füllstand darf nich über 95% liegen.
    Vielleicht das Light-Img. versuchen.


    gruss Erbse

  • Settings für BN7.0

    Hallo an Alle,

    Da ich mich mit einer DBox1 nicht so auskenn hier eine Frage:Ist es möglich,Astra/Hotird-Settings einzuspielen? Ich hab die beiden eingestellt aber die Kiste sucht nur auf Astra.Mein Signal ist möglicherweise nicht stark genug.
    Oder geht das nur mit DVB2000?

    Dank im Voraus
    Gruss Erbse

  • grosses Problem

    Hast denn schonmal mit der orig. SW v95_294y probiert? Ist ne andere Variante als die mit dem Befehl b_d.


    Nabend,
    Hab mir ein Multijtag besorgt mit ner 2x7pol. Stifftleiste.Die ist aufgelötet,also kann sie je nach dem anstecken.
    Die Betaship Rep.hat nicht geklappt,aber wenn ich den Multi angesteckt habe,also Flachkabel von Platine zum jtag und der Strom hat(USB),sind alle Sender da.Was heissen will,mit der 2,80p Soft bootet die Box vom Jtag?
    Und es geht nur mit der 2,80p.Wenn ich die Stromzufuhr stoppe und neu boote geht nix.
    Kann das sein?

    Bin planlos

    Gruss Erbse

  • grosses Problem

    Hallo,
    ich hab natürlich die 14pol. Steckleiste eingelötet.
    Es ist alles zusammengesteckt.
    Hier der Log:
    Command >:b_d0 Size: 2
    ERROR: Beta download not updated !
    IRQ St Base: 0x2e007088 Size
    B_D= Error OK

    Command >:b_dPriv Base: 0
    Beta: START download < BOOT > le
    Priv Value: 0x00000000
    Beta: block 1 updatedap Base: 0x2e026900
    ERROR: Beta down no
    Stack Base: 0x2
    Beta: * download closed *
    ERROR: Beta download not updated ! 0xcc3fffef
    B_D= Error OK
    Flas

    =====================================================

    Kannste damit was anfangen?
    Gruss Erbse