Beiträge von wetzi33

Alles gute und tausend dank mandy.
Du hast es verdient!

mfg Wetzi33

nun ja dann werde ich wohl eine neue Box Brauchen

Vielen Dank für deine Unterstützung habe mir damit viel arbeit und stundenlanges sitzen und Probieren erspart.
Nochmals Danke

mfg WETZI33

Gebe aber noch nicht auf !!!!!!

neuen display

Beim versuch jetzt die software ein
zuspielen ist nun das gekommen ????

debug: DDF: Calibrating delay loop...

debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID

01-98.e3.ca.05.00.00-ae
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via

broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file

/root/platform/nokia-dbox2/kernel/os in

Flash-FS
flboot: block not found, empty file ?
will verify ELF image, start= 0x800000,

size= 0
verify sig: 260
boot: elfcopy failed: 16
dbox2:root>

Ist ja Klarrrr

versuche noch ein anderes Display.
ich dachte mir wenn das in der zweiten Box funzt muss es hier auch gehen ,nun ja werde mal nen neuen versuch starten.

Danke Wetzi33
Melde mich wieder wenn es nicht funzt, wenn ich natürlich darf.will ja nicht lästig sein

war der falsche, war der von der sagem
nokia mit software braucht noch eine weile mit hyper Terminal fast 1Std.

mit Software

?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-b2.eb.8a.07.00.00-46
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000

U-Boot 1.1.4 (Tuxbox) (Jul 26 2006 - 05:58:23)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 650877 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 650813 Bytes = 635.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (GLJ-Team@DBOX2) (gcc version 3.4.4) #4 Sa Apr 21 21:
03:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rw rootfstype=jffs2
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30864k available (1104k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:30:e6:4d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.12.14-15:19+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Sagem
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
cam.c,v 1.31 13th of May satsuse
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter - GLJ-Team (JohnDoe,g5401) (C-Cube AViA GTX/eNX wit
h AViA 500/600).
ves1x93: Detected ves1993
DVB: registering frontend - http://glj.6x.to 0:0 (VES1993)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.

avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $

avia_gt_proc: found - AVIA eNX

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
rm: cannot remove `/var/etc/.slot0_start': No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
rm: cannot remove `/var/etc/.slot1_start': No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
rm: cannot remove `/var/etc/.slot3_start': No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/gbox_cfg: No such file or directory
rm: cannot remove `/var/etc/.slot_com': No such file or directory
grep: /var/keys/gbox_cfg: No such file or directory
rm: cannot remove `/var/etc/.slot_multi': No such file or directory
rm: cannot remove `/var/etc/.com_betad': No such file or directory
rm: cannot remove `/var/etc/.multi_betad': No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: zapit.cpp,v 1.4 2007/12/16 13:26:10, patched by GLJ-Team (JohnDoe) Exp $
[zapit] PMT update enabled
[getservices] loading motor positions...
[getservices] motor.conf not found.
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
Killed
Killed
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 43E onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 412 onid 1
/tmp/currentservices.xml: No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[sectionsd] Caching max 2500 events
[sectionsd] Caching 1 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
/tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
/tmp/neutrino)
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...[basicsocket] send_data: Resourc
e temporarily unavailable
OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[neutrino] menue setup
[basicsocket] send_data: Resource temporarily unavailable
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
zap failed!
[sectionsd] getUTC: read: Connection timed out
zap failed!

Mit Display ohne software noch

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-98.e3.ca.05.00.00-ae
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File not found: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>

Schaut aus als hättest du ein shareware image ?????

Nun spass bei seite,hast du schon ein image aus dem ULC genommen den die laufen sicher,
um festzustellen ob es wirklich am image oder an der Bbox liegt .
Ich bevorzuge das GLJ-image

VIEL GLÜCK mfg wetzi33

Wer sagt es den ,die Richtigen FILES und alles geht wieder

D-Box2 Nokia bei Key -wechsel wartezeit Ca. 3sec. und wieder alles da:D

Auch ich habe mich angesteckt ,Ich muß euch sagen, das ich so oft es geht da bin.
es ist einfach Toll !!!!!!

HALLO Leute Habe eine DBox 2 Sagem 1x habe auch schon sämtliche images ausprobiert und auch viele einstellungen in den Menüs umgestellt, nun nach ca.10-15min habe ich Bild und Ton aussetzer ( das sogennante zwitschern ).
Gibt es da eine Lösung ?????

Habe für die Sagem folgendes Image das super funzt ,ohne zwitschern und ohne bild und ton störung

NG-Return_Image_R11_SATuKABEL_1x.img

Habe leider auch das gleiche problem
kann jemand helfen

Ich sag schon mal Danke !!!

Ich komme aus ÖSTERREICH

MFG wetzi33